Snow Retention : DualGard
DualGard™ is a 2 – 1” pipe system with snow clips
DualGard™ mounts to two S-5! mini clamps with the stainless steel bolts provided. The S-5! clamp attaches to the standing seam of the panel by tightening the stainless set screws with a hex bit attachment to any commercial screw gun. The special stainless steel, round nosed screw developed by the makers of S-5! will slightly dimple, but not cut or pierce the panel seam material. For maximum holding strength, set screws should be tightened and sequentially retightened as the seam material compresses. See System Photos
